Parts
Contents
Kits can be ordered -> here
To assemble the pcb the following parts are needed:
[table caption=”resistors
– (all 0207, 1% metalfilm)” width=”150″ colwidth=”50|10″ colalign=”left|left”]
quantity| type
1x|100R
1x|750R
2x|820R
2x|1k
2x|1,8k
2x|4,7k
2x|8,2k
3x|10k
2x|100k
2x|1M
[/table][table caption=”capacitors” width=”420″ colwidth=”50|370″ colalign=”left|left”]
quantity| type
1x|33pF (spacing 5.0mm, ceramic)
1x|2,2nF (spacing 5.0mm, film)
7x|100nF (0,1µF) (spacing 5.0mm, film)
1x|470nF (0,47µF) (spacing 5.0mm, film)
2x|1µF (spacing 5.0mm, film)
7x|47µF (max-Ø:7.0mm, 25V, electrolytic)
1x|100µF (max-Ø:7.0mm, 25V, electrolytic)
[/table][table caption=”semiconductors” width=”320″ colwidth=”50|270|” colalign=”left|left”]
quantity| type
1x|1N4148
4x|12V 0,5W Zener (BZX55C12)
1x|1N4007
1x|LED low current 3,0mm
1x|BC547B (TO92)
1x|78L05 (TO92)
2x|MMBF5457 (SOT23)
[/table][table caption=”mechanical” width=”400″ colwidth=”50|350″ colalign=”left|left”]
quantity| type
1x|FRT5 DC5V, Takamisawa A-5W-K or Zettler AZ850-5
1x|dc-jack print
2x|NMJ4HCD2 mono jack
2x|16/17mm pot angled print 25kA (log)
1x|16/17mm pot angled print 500kA (log)
1x|footswitch (small, min. 1xSPDT)
1x|washer for footswitch
4x|wires 10cm each
[/table]
others:
- scissors and/or scalpel
- superglue/hot glue
- insulating-tape
- solder
- lacquer (spraypaint)
- some decals
- tools (soldering iron, side cutter, round nose pliers/tweezers, desoldering pump/-braid, screw drivers, a set of socket spanners or a wrench, lighter)
- grain alcohol, brake cleaner, (optional: PCB cleaner)
- steel wool
- paper towel
- lint-free cloth