Parts
Contents
Kits can be ordered -> here
To assemble the pcb the following parts are needed:
[table caption=”resistors
– (all 0207, 1% metalfilm)” width=”150″ colwidth=”50|10″ colalign=”left|left”]
quantity|type
1x|4,7R
2x|220R
4x|1k
3x|3,3k
5x|10k
1x|18k
1x|68k
3x|100k
1x|10M
[/table][table caption=”capacitors” width=”420″ colwidth=”50|370″ colalign=”left|left”]
quantity|type
2x|100pF (spacing 2.5mm, ceramic)
2x|4,7nF (spacing 5.0mm, film, min. 100V)
1x|10nF (0.01µF) (spacing 5.0mm, film)
1x|22nF (0.022µF) (spacing 5.0mm, film)
3x|100nF (0.1µF) (spacing 5.0mm, film)
2x|330nF (0.33µF) (spacing 5.0mm, film)
6x|10µF (spacing 2.5mm, max-Ø5.0mm, min. 50V, electrolytic)
[/table][table caption=”semiconductors” width=”320″ colwidth=”50|270|” colalign=”left|left”]
quantity|type
8x|1N4148
1x|1N5817
1x|9,1V zener – 1,3W (BZV85-C9V1)
1x|TC7660H
1x|3mm Duo-LED – common cathode (L-93WEGW)
3x|TL072
[/table][table caption=”mechanical” width=”450″ colwidth=”50|400″ colalign=”left|left”]
quantity|type
1x|dc-jack print
1x|9V battery clip
1x|NMJ4HCD2 mono jack
1x|NMJ6HCD2 stereo jack
1x|NC3MAH-B XLR jack
2x|screws for XLR jack (A-Screw-1-8)
2x| 16/17mm pot angled print 2x50kA (log)
1x| 16/17mm pot angled print 50kA (log)
2x|pcb switch latching dpdt with caps
1x|pcb switch latching spdt with caps
1x|footswitch (3PDT)
1x|washer for footswitch
4x|DIL08 socket
10x| wires 10cm each
1x|100x20mm self-adhesive 6,5mm foam
[/table]
Sonstiges:
- scissors and/or scalpel
- superglue/hot glue
- insulating-tape
- solder
- lacquer (spraypaint)
- some decal
- tools (soldering iron, side cutter, round nose pliers/tweezers, desoldering pump/-braid, screw drivers, a set of socket spanners or a wrench, lighter)
- grain alcohol, brake cleaner, (optional: PCB cleaner)
- steel wool
- paper towel
- lint-free cloth