Paranoia

Required Parts

Kits can be ordered -> here

To assemble the pcb the following parts are needed:

[table caption=”resistors
– (all 0207, 1% metalfilm)” width=”150″ colwidth=”50|10″ colalign=”left|left”]
quantity| type
1x|4.7R
2x|470R
6x|1.5k
1x|3.3k
4x|4.7k
8x|10k
4x|100k
1x|1M
[/table][table caption=”capacitors” width=”420″ colwidth=”50|370″ colalign=”left|left”]
quantity| type
2x|100pF (RM2.5mm, ceramic)
2x|2.2nF (0.0022µF) (RM5.0mm, film)
2x|15nF (0.015µF) (RM5.0mm, film)
2x|82nF (0.047µF) (RM5.0mm, film)
2x|100nF (0.1µF) (RM5.0mm, film)
6x|10µF (RM2.5mm, max-Ø5.0mm, electrolytic)
4x|100µF (RM2.5mm, max-Ø6.3mm, electrolytic)
[/table][table caption=”capacitors” width=”420″ colwidth=”50|370″ colalign=”left|left”]
quantity| type
2x|1mH (100 mA, 11.5 Ohm, RM2.0mm -> RLB0608-102KL)
[/table][table caption=”semiconductors” width=”320″ colwidth=”50|270|” colalign=”left|left”]
quantity| type
4x|1N4148
4x|1N5818
1x|BZV85-C13
1x|BC547B
1x|78L05
1x|3mm LED orange/yellow
1x|TL072
1x|TL074
1x|TC7662B
[/table][table caption=”mechanical” width=”450″ colwidth=”50|400″ colalign=”left|left”]
quantity| type
1x|dc-jack print
2x|NMJ4HCD2 mono jack
1x|16/17mm pot angled print 10kB (lin)
1x|16/17mm pot angled print 2x10kB (lin)
2x|16/17mm pot angled print 50kB (lin) [optional with Center Click]
1x|pcb switch latching dpdt with caps
1x|print relais (FRT5 DC5V, Takamisawa A-5W-K or Zettler AZ850-5)
1x|footswitch (small, min. SPDT)
1x|washer for footswitch
2x|DIL08 socket
1x|DIL14 socket
4x|wires – 10cm each
[/table]

misc.

• PCB-cleaner
• insulating-tape
• solder
• tools
  • soldering iron,
  • side cutter,
  • round nose pliers/tweezers,
  • desoldering pump/-braid,
  • screw drivers,
  • a set of socket spanners or a wrench