MS-TrueBypass

Parts

Kits can be ordered -> here

To assemble the pcb the following parts are needed:

resistors
- (all 0207, 1% metalfilm)
quantity type
1x 150R (LED)
2x 10k
capacitors
quantity type
4x 0.1u (100n) (spacing 2.5mm, MLCC)
1x 100u (max-Ø8x7mm, electrolytic)
semiconductors
quantity Typ
1x 1N4148
1x LED low current 3mm (e.g. green)
1x BC547B
1x microcontroller (pre-programmed)
mechanical
quantity type
1x FTR-B3CA003Z relay
1x DIL08 socket (lowcost)
2x M3 6mm screw
2x M3 15mm distance bolts
1x 3mm LED Clip
11x wire 20cm each (e.g. 2x yellow, 2x orange, 1x teal, 1x blue, 1x green, 1x red, 3x black)
2-3cm shrink tube (1.6mm->0.8mm)

other:

  • insulating-tape
  • solder
  • tap and die set for M3-thread (if possible longer version)
  • 4.2mm drill (or: 4mm drill + small round file)
  • tools (soldering iron, side cutter, round nose pliers/tweezers, desoldering pump/-braid, screw drivers, a set of socket spanners or a wrench, lighter)